Introduction to the performance of HK pneumatic diaphragm pump
HK pneumatic diaphragm pump can not only pump flowing liquid, but also transport some difficult-to-flow media:
1. Diaphragm pump does not need irrigation and diversion, suction lift up to 7m, lift up to 50m, outlet pressure ≥ 6kgf/cm2;
2. The flow is spacious and the passing performance is good. The maximum particle diameter allowed to pass is 10mm. When pumping mud and impurities, there is little wear on the pump;
3. The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure can be adjusted between1-7kgf/cm2);
4. The diaphragm pump has no rotating parts and no shaft seal. The diaphragm separates the pumped medium from the moving parts and working medium of the pump, and the transported medium will not leak out. Therefore, when pumping toxic, volatile or corrosive media, it will not cause environmental pollution and endanger personal safety;
5. No electricity, safe and reliable to use in flammable and explosive places;
6. The diaphragm pump can work submerged in the medium;
7. The function is convenient, the work is reliable, and the start and stop only need to simply open and close the gas valve.Even if it runs without medium for a long time or stops suddenly due to accidents, the pump will not be damaged. ground shutdown, with self-protection performance, when the load returns to normal, it will automatically start to run;
8. The structure is simple and there are few wearing parts. The pump has a simple structure and is easy to install and maintain.The performance of blades and other components is gradually reduced due to wear;
Specification :
Company Profile:
Anhui Hengnai Pump Industry Co., Ltd. is a high-tech enterprise integrating design,development and production. The company specializes in the production of QBY series pneumatic diaphragm pumps, DBY series electricdiaphragm pumps, IS series centrifugal water pumps, IH series chemical centrifugal pumps, IMC Series of magnetic pumps,self-priming pumps, pipeline pumps, IHF fluorine-lined centrifugal pumps, IMC-F fluorine-lined magnetic pumps and other customized pump products, serving chemical, vinyl-soil separation, pesticides, petroleum, electroplating, smelting, electronics, pickling industries, With better variety advantages, excellent quality advantages, and obvious price advantages, it has left a good reputation among thousands of users.our company's purpose is "innovation leads the future, pragmatism promotes development", thebusiness service concept of "excellence, continuous innovation, sincerity, and customer care", sincerely cooperate withfriends from all over the world, and jointly develop a bright future!
Certifications
Contact Us:
|
Rita Li (Sales Mananger )
|
|
|
|
Q1:It is possible to use our own brand and logo ?
A1:Yes, its acceptable.
Q2:What're your payments?
A3:Most of our customers chose T/T. We also accept L/C . For L/C please confirm with us with exact order,or any other payment ways pls contact to us .
Q3:How is the pump delivered to us?
A3:The small one would be delivered by international express, like DHL, FEDEX, UPS & TNT.While the big one or quantity would be delivered by sea,or as customers' requirement .
Q4:How long is the warranty?
A4:Normmally we can provide 5 years warranty for the pump body,According to the international standards, pump in standard operation is 12 month( except wearable parts & seal ). For wearable parts & seal, we provide replace able one of cost price.
Audited Supplier 
){kind=link}